Shivam Instruments IndiaShivam Instruments India
Shivam Instruments India Shivam Instruments India Shivam Instruments India Shivam Instruments India Shivam Instruments India Shivam Instruments India
Shivam Instruments IndiaShivam Instruments IndiaShivam Instruments India
Shivam Instruments India
Shivam Instruments India
Home » Our Products » Laboratory Instruments » Rotary Shaker
1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 - 11 - 12
Shivam Instruments India

Rotary Shaker (Horizontal)

DFor continuous shaking of solutions in Eriynmeyer flask from 50 ml to 1000 ml. capacity. Compact bench type model with platform fitted with rubber discs, mounted in ball bearing crank shafts to give an orbital motion to the flask. The motor is coupled by means of V-belt with pitch pulley and is mounted on a heavy and sturdy iron angel frame. Shaking speed 50-250 RPM is controlled mechanically to work on 220/230 Volts AC supply.
SHI-168

S.no Platform Size Holding Capacity H.P.
a. 45 x 45 cm 25 Flask of 100 ml. 0.25
b. 45 x 45 cm 36 Flask of 50 ml. 0.25
c. 45 x 45 cm 49 Flask of 25 ml. 0.25
d. 45 x 45 cm 16 Flask of 250 ml. 0.25
e. 55 x 55 cm 25 Flask of 250 ml. 0.25
f. 60 x 60 cm 36 Flask of 250 ml. 0.50
g. 100 x 100 cm 81 Flask of 250 ml. 1.00
h. 125 x 125 cm 64 Flask of 500 ml. 1.00
i. 125 x 125 cm 49 Flask of 1000 ml. 1.00





Shivam Instruments India

Shaking Machine (Reciprocation Khan's Type)

SHI-169
Complete with carrier for flasks, test tube, racks, bottle etc. Speed are unaffected by normal line voltage fluctuation or loading within specified limit. Provided with D. C. Motor. Speed regulator for variable speed from 80 to 250 RPM. Carrier Size 20" x 13" x 4" with covered body with D .C. Motor







Shivam Instruments India

V.D.R.L. Shaker

SHI-170
Used for V.D.R.L. tests, blood grouping tests, various agglutination tests or for mixing of solutions in small bottles, flasks or beakers. It has a platform of size 300 x 300 mm and can accommodate blood bottles slides or flasks using a spring holder/ Supplied complete with cord and plug to work on 220/230 volts A.C. With variable speed 70 to 210 RPM
With variable speed 70 to 210 RPM & fitted with 0-120 min. mechanical timer




Tube Rotor For 36 Tubes

SHI-171
Speed 1 to 4 RPM having 10" dia & the size of the tube is 15mm x 150mm. The disc can be set at any angle suitable to work on 220 volts 50 cycles A.C. only with cord and plug. Complete with all accessories.

request a quote




Sieve Shaker Hand Operated

SHI-172
Can accommodate up to 7 sieves of 8"dia, gears operated by a hand wheel. A heavy fly wheel ensures smooth operation. A heavy fly wheel ensures smooth operation.

request a quote




Sieve Shaker (Grytory Motorized)

SHI-173
This can accommodate up to 7 sieves of 6"to 8" dia and is driver by ¼ H.P. Electric Motor through reduction gear. Every part of the sieves is utilized by the constant upward and downward movement. The whole gear mechanism runs in oil bath supplied without test sieves suitable for operation on 220 Volt AC.

request a quote




Sieve Shaker (Rotop Motorized)

SHI-174
This is heavy machine driven by ¼ H.P. Motor. The circular end to end motion to give by mechanism which is fully immersed in oil. The tapping motion is given by hammer from the top. The shaker takes 6" to 8" sieves

request a quote




Wet Sieve Shaker (Yoder Type)

SHI-174A
This Yoder type motor driven sieve shaker is for carrying out wet sieve analysis of material. Consists of a water reservoir and a holder for sieve which can take unto 7 sieve of 8" dia. The shaker is driven by 1/4 HP motor through a belt drive.

request a quote




Universal Shaking (Machine)

SHI-175
This shaking machine is designed for dissolving of substances, mixing and speed up chemical reaction. The shaking top plate of the apparatus and receive baffles its clamps. The shaking regulated with a rheostat 30 to 50 strokes per minutes complete with 4 flasks holders.

request a quote




Lab. Willy Mill (arthur h. Thomas type)

Chamber fitted with polished hopper three delivery stainless steel sieves of 20, 40 and 60 mesh with plastic receiver acrylic plate
SHI-176

Size of Inner Chamber H.P. Motor
40 x 25 mm ¼ H.P.
65 x 25 mm ¼ H.P.
100 x 50 mm 1/2 H.P.
200 x 75 mm 1 H.P.


request a quote


1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 - 11 - 12