Home  /  Our Products  /  Orbital Shaking Incubator (Cooling System)

Orbital Shaking Incubator (Cooling System)

Temperature controlled by Digital Temp. Controller cum indicator 5°to 60°C, with an accuracy of +/-0.5°C or better. Temperature below ambient is maintained by a hermetically sealed compressor with complete unit placed beneath the chamber. Shaking speed can be controlled by speed regulator and fitted with D.C. drive indicated by Digital RPM meter. Shaking platform also made of S.Steel to accommodate 16 flask of 500ml. capacity..A stainless steel perforated tray is also provided for the use of upper portion of the chamber as a simple BOD incubator. An illumination lamp is also provided inside the chamber, suitable to work on 220/230 V, 50Hz. Single phase AC supply.
Chamber Size : 625x550x550mm to hold 16 flask of 500ml

Technical Specifications
Temperature Range+5°C to 60°C
Temperature Accuracy+ / -0. 5°C
Temperature Uniformity + / - 1°C
Temperature Controller Microprocessor based PID controller
Temp DisplayDigital
Air Circulation2 NOS Forced by 1/35fhp motor and blower
Power 220-230v 50Hz
Heating ElementStainless Steel
MOCExterior: MS powder coated
Interior: 304 stainless steel
InsulationGlass wool/Puff
DoorsSolid doors with gasket & lock
Inner DoorGlass with Aluminum Frame
Shelves1 no of steel wire .
ShakerRotary type shaker with lotus clamps to hold flask.
Cooling SystemHermetically sealed COPELAND /KIRLOSKAR Condensing unit/compressor
IlluminationBy LED tube
Control PanelMCB, Main& Cooling ,Heating indicator, PID temp controller,
Digital RPM indicator with DC drive for shaker , Speed Regulator.
Door LockProvided with Lock & Key
OptionalOuter body of Stainless steel 212/304 Illumination by 3 nos LED tubes 0-24 Hrs Digital timer Rs-232 computer interference compatible to computer with software. NABL calibration of digital temp controller.