Dry heaters for extractors of soxhlet, suitable for heating of soxhlet flasks-50-500 ml. It consists of M.S. housing two vertical & two horizontal rods with screw to hold flasks.

This is useful for distillation purpose for 300 & 500 ml. flasks, provided with M/Steel tubular stand and brass condenser rack. Works on 220/230 V AC

This is useful for estimation of Nitrogen content in the substance by digestion for 300 & 500 ml. flasks, provided with (1) PVC fume duct (2) M. Steel Stand (3) Pairs of Hangers etc.

Double walled, inside made of heavily tinned brass of stainless steel and outer mild steel sheet. There thermostatically Controlled up to 100ºC having concentric rings (to be used according to the size of the flask) provided with two vertical and two horizontal aluminum rod.

This equipment is light portable, compact and efficient with built in control. The unit has 40 digestion tubes of 75 ml volume. The unit is supplied with (1) Digester (made of casted Aluminum having 40 tubes holes for digestion tube) and (2) A1 Detection Tube stand. Temperature is controlled by Energy Regulator up to 400ºC. Complete with two pilot lamp, plug & cord (but without glass tubes). To work on 220/230V AC
Optional Accessories

• Digital Temperature indicator cum controlled

To determine the chemical oxygen demand. It is a solid state heater unit with provision for samples size to heat at temperature of 150ºC +/-1°C controlled by Digital controller cum indicator. It has provision with glass reaction vessels and air condensers. Fitted with the 2 hrs mechanical . timer to work on 220/230V AC, single phase supply.

It is useful for drying slides with aluminum or S.Steel top stove enameled body, fitted in energy regulator to control temperature upto 70°C to work on 220/230V AC.

Suitable for laboratories, chemicals, pharmaceuticals, dyes, glass plants etc. Used particularly for heating inflammable liquids. Electric heating net in hand knitted from glass yarn and there is no joint to maintain the strength of the yarm and stands high temperature upto 350ºC. The body of the mantle is spun one piece from mild sheet duty staving painted. All heating mantles are legged with special minerals wools to work on 220/230V AC supply.

Temp range upto 300°C

Outer body made of perforated P.C.R.C. sheet and fitted with coil type heating element. Painted attractively with good stove enamel. The cost iron top plate is 20.5 cm dia fitted with an indicating lamp. Used for heating upto 350ºC. To work on 220/230 V AC supply.
Size                         Energy
20.5 cm                   1.5 kw