» Laboratory Instruments
Innoculation Chamber / Tissue Culture Hood
Inoculation Chamber / Tissue Culture Hood
Made of thick wooden board covered with sun mica.
Working table also covered with sun mica. Front fitted with transparent
plexi glass with option to lift the door up. Side also made of fixed plexi
glass. Provided with glove ports gauntlets on front, one fluorescent tube
and U.V. Light.
- Size 40"x 24" x 22"
- Size 22" x 20" x 16"
Biological Safety Cabinet
The cabinet is fabricated out of thick board duly
sun mica covered. Interior surface is epoxy painted for durability and
better finish. The work table is made of heavy gauge stainless steel and
fitted with UV germicidal light. Static pressure manometer & exhaust
system. Side panel is made out of thick transparent glass duly framed. The
unit is fitted with pre filter and made it pass through highly effective
HEPA filter having efficient of retaining all air-borne particles of size
0.3 micron of large. Motor of 0.25 HP operates with minimum noise level. The
working table provides a comfortable sit down working position for the
operator. Apart from all the facilities of vertical laminar air flow, bio
safely cabinet have arrangement for re-circulation of air thus creating
highest level of clean air, supplied complete with glove ports and gauntlets
in the acrylic front sliding door, Suitable to work on 220/230V, 50 Hz.
Single phase AC supply.
||2' x 2' x 2'
||4' x 2'x 2'
||6' x 2' x 2'
|Size. of HEPA-F
||2' x 2' x 2'
||4' x 2' x 6'
||3' x 2' x 6'
|No. of HEPA-F
||1 x 20W
||1 x 40W
||1 x 40W
Thick wooden board fabricated, outer is finished
with Laminated Mica and inner duly painted, designed so as throw out all
toxic/harmful vapors, thus protecting costly instruments and the person
working in the lab. Working table top is fitted with acid/ alkali resistant
tile. Provided with a Stainless Steel Sink with provision for water tap&
outlet. The front door moves vertically up & down with concealed counter
balanced weight/by Hinges The unit is fitted with fluorescent light and a
gas cock for gas/air supply. The space under the work station can be
provided with switches for exhaust system and fluorescent lights. Workable
on 220 Volts AC supply.
Exhaust System, PVC Fume Duct , Storage Compartments, FRP/SS lining on
Tissue Culture Rack With Timer
Made of tubular M.S. / Aluminum pipes duly painted
fpr longer life. Each rack of size 48"x21" (Depth) is covered with
thick unbreakable Plexiglas's/ Aluminum sheet. Distance between each rack is
15". Each rack is fitted with 4 fluorescent tubes, 4 bulbs and one U.V.
germicidal light. Electronic chokes are fitted on the rack to avoid the heat
Rotary Vaccum Evaporated (Buchi Type)
The apparatus consists of an evaporated flask
rotated by non sparking induction motor in a heating water bath. Vaccum
distillation of solvent at high ad low temperature is achieved quickly and
efficiently by use of a fixed speed motor, which prevents foaming and
bumping of the liquid (solvent) into the evaporating flask and also
distillation under controlled atmosphere. The evaporating flask is pear
shaped to give a large surface area of evaporation and is clamped to a glass
duct which goes through the drive unit and protrudes about 120mm into the
condenser. The condenser is fitted with standard joint at the top and the
bottom for receiver flask. The unit is fitted with a quick action jack.
- Capacity 1 Ltr. Fitted with quick action jack
- Capacity 3 Ltr. Fitted with quick action jack.
- Capacity 5 Ltr. Fitted with quick action jack
- Capacity 10Ltr. fitted with quick action jack
Thermostatic water bath, Water Bath Digital model, Vaccum Pump
Bottle Washing Machine With Tank (Gi-Sheet)
Size 20"x30"x12" with two brushes,
12 rinsors and 2 drill chucks
Following size is tank also available.
1. Size 30" x 20" x 18"
2. Tank size 30" x 20" x 18"
Agate Pastle And Mortar (Fisher Type)
Mainly used for grinding of material which are not
gummy of fibrous. Mortar revolves and pastel moves back and forth in a
pattern reaching all parts of the mortar. The adjustable post can hold 75 to
135mm dia motor. The grinding vessel and mortar and completely covered by
clean acrylic sheet. Built in timer permits of agate pastle mortar75mm and
100 mm Dia to operate at 220 Volts
Automatic pipette washer completely made of
stainless steel, can accommodate pipettes upto 375mm in length. It is based
on the principles of agitation and strong suction developed by water during
repeated filling and siphoning
Pipette Drier (Electrical)
Made of Stainless Steel, drying heater of 250 Watts
fitted in base chamber size 480 mm height and 140mm Dia can accommodate
glass wares upto 375mm height. Operates on 220 Volts AC.
Butyro Reflactometer (Oil & Sugar Recractometer)
It has a double scale. One is oil scale (Butyro
scale) having range of 0 to 100 and accuracy of ±0.1 read directly on
the micrometer. The other is sugar scale having a range of 50-80% with an
accuracy of ± 1% also read direct on scale.